Installation Guide

EZ Pitched Roof System
10 of 29
1/4” Slot Rail Splice Kit with 4X
bolts and flange nuts with integral
grounding. May be repositioned
until torqued to final value.
K10177-001
K10177-BK1
HR250/HR350 1/4” Splice
For single-use only
K10250-001
K10250-001-BK
HR500 1/4” Splice
Requires bond jumper
End Clamp Kit, fits panel height
from 31 to 50 mm. For last 3
digits, see table on last page.
K10224-1XX
K10224-1XX-BK
Grounding Mid Clamp Kit fits panel
height from 31 to 50 mm. May be
repositioned until torqued to
final value.
K10180-001
K10180-001-BK
For single-use only
Grounding End Clamp Kit with
shared rail adaptor for standard
rail; fits panel height from 31 to 50
mm. For last 3 digits, see table on
last page. May be repositioned
until torqued to final value.
K10183-1XX
K10183-1XX-BK
For single-use only
Grounding Mid Clamp Kit with
shared rail adaptor for standard
rail; fits panel height from 31 to 50
mm. May be repositioned until
torqued to final value.
K10182-001
K10182-001-BK
For single-use only
Grounding Lug Kit with Grounding
Spacer and 1/4-20 T-Bolt. May be
repositioned until torqued to
final value.
K10179-001
For single-use only