Installation Guide

Double-check
975-0289-01-01 3–19
Replacing the Top Cover
Double-check
Before applying power, double-check the following connections.
❐ Are the batteries cabled properly? No reverse polarity!
❐ Battery Box to Inverter Connections - Are the Anderson connectors
securely in place?
❐ Are the solar panels wired properly?
❐ Are the wind generators cabled properly?
❐ Are the appropriate disconnects, circuit breakers, etc. in place?
❐ Is all the wiring and cabling in undamaged condition?
Figure 3-17 Replacing the Top Cover on the Inverter
1. Place the top cover back on
the inverter and align the holes.
2. Replace the 5 #6-32 Phillips
screws on the top of the
inverter.
3. Torque to 1.3 nm (11.5 in-lbs)
975-0289-01-01(PowerHub_1800_IG).book Page 19 Thursday, June 4, 2015 9:49 AM