Installation Guide

Wiring
975-0289-01-01 3–9
Wiring
Plug-and-go (Softwiring)
The PowerHub 1800 comes assembled with an AC input cord. This AC
cord can be plugged into a 120 Vac outlet on a 120 Vac generator to
charge the batteries.
Important: The input cord is intended to allow connection to portable
generators in non-permanent installations. For fixed permanent installations, use
electrical code-compliant wiring methods. See “Permanent Wiring
(Hardwiring)” on page 3–10 for instructions.
Figure 3-8 Plug-n-Go Wiring (Softwired)
120 Vac
Outlet only
AC Generator
Important: The combination
of loads cannot exceed 1440 W.
975-0289-01-01(PowerHub_1800_IG).book Page 9 Thursday, June 4, 2015 9:49 AM