Installation Guide

Installation
3–6 975-0289-01-01
Connecting the Battery Bank to the Inverter
WARNING
ELECTRIC SHOCK HAZARD
Once the battery bank is connected to the inverter, if the batteries are charged,
the inverter outlets may become "live". If the PowerHub is to be hardwired,
wait until all wiring is complete BEFORE connecting the battery bank.
Failure to follow these instructions can result in death or serious injury.
NOTICE
EQUIPMENT DAMAGE
Double-check the cabling of the batteries to ensure proper polarity BEFORE
connecting the battery box to the inverter. Damage caused to the inverter due to
improper battery cabling is not covered by the limited warranty.
Failure to follow these instructions can result in inverter damage.
Figure 3-5 Connecting the Battery Bank to the Inverter
Insert the Anderson connectors into
the Battery Connection Port on the
Inverter.
Ensure the connector is inserted
completely. This may require some
force as the connectors are tight.
Battery Connection
Port (x2)
975-0289-01-01(PowerHub_1800_IG).book Page 6 Thursday, June 4, 2015 9:49 AM