Installation Guide

Introduction
1–8 975-0289-01-01
Wind Applications
Maximum size of wind turbine:
• 1000 W maximum on 80 A DC terminal only
• Self-regulation required.
• Disconnect recommended
Important: Installations of this kind must be certified/approved as
“code-compliant” to the national and local building and electrical codes.
Installers should have adequate knowledge of national and local code to ensure
the installation passes inspection by the local electric authority.
Figure 1-7 Hardwired Wind Applications
Wind Turbine
AC OUT
DC IN
AC Distribution Panel
(Sub-Panel)
DC Disconnect
(recommended)
Important: The combination
of loads cannot exceed 1440 W.
Run-times will depend on the
amp-hour rating of the batteries.
Example only.
Actual installation may vary.
975-0289-01-01(PowerHub_1800_IG).book Page 8 Thursday, June 4, 2015 9:49 AM