Installation Guide

Applications
975-0289-01-01 1–7
Solar Applications
Maximum size of PV array depends on the DC input terminals used:
• 400 W Maximum on 32 A DC terminal
• 1000 W Maximum on 80 A DC terminal
• Additional charge controllers and other hardware may be required.
Important: Installations of this kind must be certified/approved as
“code-compliant” to the national and local building and electrical codes.
Installers should have adequate knowledge of national and local code to ensure
the installation passes inspection by the local electric authority.
Figure 1-6 Hardwired Solar Applications
Example only.
Actual installation may vary.
AC Distribution Panel
(Sub-Panel)
DC Disconnect
(recommended)
Charge Controller
(required)
(C60 shown as
example only)
Solar Panel(s)
DC IN
AC OUT
Important: The combination
of loads cannot exceed 1440 W.
Run-times will depend on the
amp-hour rating of the batteries.
975-0289-01-01(PowerHub_1800_IG).book Page 7 Thursday, June 4, 2015 9:49 AM