Owner's manual

Part number 18260 4 13/04/2006

3 Controls and indicator lamps

Case rear view (Figure 1)

Control Panel (Figure 2)

The run/charge switch when in the run position is used to start unit and in the charge position

charges the internal battery.

The temperature display normally shows the block temperature in °C.

The set temperature °C is set to 37°C and can be adjusted on temperature controller.

The red LED when illuminated indicates 240V mains power operation.

The yellow LED when illuminated indicates 12V Dc power operation.

Grant Set Temperature

1AF 5AF

Fuses

Run

Charge

Controller temperature

display (see fig 3)

Fuses

Run/Charge Power Switch

Red L.E.D Power Indicator (240V)

Block

Yellow L.E.D indicator (12V)

12V Cigar lighter plug

12V Dc Cable

IEC Mains

Socke