Use Instructions

• The codes below are printed on batteries
containing harmful substances:
Pb = Battery contains lead,
Cd = Battery contains cadmium,
Hg = Battery contains mercury.
12. Specications
Device
Model no.
BM 81
Type
MD6000
Measurement method Oscillometric, non-invasive blood pressure measurement on the
upper arm
Measurement range Cu pressure 0 – 300 mmHg,
systolic 50 – 250 mmHg,
diastolic 30 – 200 mmHg,
Pulse 40 –180 beats/minute
Display accuracy Systolic ± 3 mmHg, diastolic ± 3 mmHg,
pulse ± 5 % of the value shown
Measurement inaccuracy Max. permissible standard deviation according to clinical testing:
systolic 8 mmHg /diastolic 8 mmHg
Memory 2 x 120 memory spaces
Dimensions L 175 mm x W 117 mm x H 50 mm
Weight Approx. 518 g (without batteries, with cu)
Cu size 24 to 40 cm
Permissible operating conditions +5 °C to + 40 °C,
15 % – 90 % relative air humidity (non-condensing)
Permissible storage and transport
conditions
- 25 °C to + 70 °C,
up to 90%, non-condensing Atmospheric pressure: 700 hPa to 1060 hPa
Power supply
4 x 1,5 V
AAA batteries
Battery life For approx. 120 measurements, depending on the blood pressure
level and/or pump pressure
Classication Internal supply, IP22 , no AP or APG, continuous operation, applica -
tion part type BF
Data transfer via Bluetooth
®
wireless
technology
The blood pressure monitor uses Bluetooth
®
low energy techno -
logy,
2402MHz – 2480MHz frequency band,
Transmission power max. 4 dBm,
Compatible with Bluetooth
®
4.2 smartphones/tablets
The serial number is located on the device or in the battery compartment.
Technical information is subject to change without notication to allow for updates.
Service life
10,000 measurement at least.