Use Instructions

Average values
PM ashes on the display.
The average value of the evening measurements for the last 7 days is displayed
(evening: 6.00 p.m. – 08.00 p.m.).
Individual measured values
• When you press the memory button M again, the last individual measurement
is displayed (in this example, measurement 03).
• When the memory button M is pressed again, you can view your individual measured values.
•
T o switch the device o again, press the Start/stop button or wait 30 sec.
You can exit the menu at any time by pressing the Start/stop button .
Deleting measured values
• In order to delete all saved measurements from a user, rst select it as described.
•
A ashes on the display and the average value of all saved measured values in this user memory is
displayed.
• P ress and hold both setting buttons + and -
•
CL 00 appears on the display. All the values in the current user memory are
deleted. Das Gerät schaltet sich im Anschluss automatisch ab.
8. Cleaning and maintenance
• C lean the device and cu carefully using a slightly damp cloth only.
• Do not use any cleaning agents or solvents.
• Under no circumstances hold the device and cu under water, as this can cause liquid to enter and dam -
age the device and cu.
• If you store the device and cu, do not place heavy objects on the device and cu. Remove the batteries.
The cu line should not be bent sharply .
9. Accessories and replacement parts
Accessories and replacement parts are available from the corresponding service address (according to the
service address list). Please state the corresponding order number.
Designation Item number and/or order number
easyLock- Universal cu (24-40 cm) 164.290