Use Instructions

Measurement
• If the Bluetooth
®
function has been activated, the data transfer to the “beurer HealthManager” app
starts automatically after the measurement.
• The
Bluetooth
®
symbol ashes on the display. The device now attempts to connect to the app for
approx. 30 seconds.
• The
Bluetooth
®
symbol stops ashing as soon as the connection is established. All measurement data
is transferred to the apps. Once the data transfer is successfully complete, the device switches o
automatically.
• If a connection to the app cannot be established after 30 seconds, the
Bluetooth
®
symbol goes out
and the device switches o automatically after 1 minute.
• If you forget to turn o the device, it switches o automatically after approximately 1 minute. In this
case too, the value is stored in the selected or most recently used user memory.
Unlocking the cu and removing the device
After the measurement has been taken successfully, you can take o the device again. To
do so, proceed as
follows:
• P
• Y
Transfer of measurements via Bluetooth
®
In addition to displaying and saving your measurements locally on the device, you have the option of trans -
ferring your measurements to your smartphone using Bluetooth
®
low energy technology.
For this you need the “beurer HealthManager Pro” or “beurer HealthManager” app. These apps are available
for free in the Apple App Store and from Google Play.
System requirements:
– iOS ≥ 12.0, Android
TM
≥ 8.0
– Bluetooth
®
≥ 4.0
List of compatible devices:
To transfer the measured values, proceed as follows:
Step 1:
Activate the Bluetooth
®
function on your device as described in section “Setting
the hour format, date, time and Bluetooth
®
”.
Step 2: “beurer HealthManager Pro” or “beurer HealthManager” app
In the „beurer HealthManager Pro“ or „beurer HealthManager“ app, add the BM 81
under Settings / Devices and follow the instructions.