User's Manual

22
TRANSFER MEASUREMENT DATA TO SMART DEVICE (Model: MD5980 / MD5990)
For the first time use
1. Download and install the free “G.LAB Health” app on your smart device.
2. Turn on the Bluetooth feature of the smart device.
3. Open the “G.LAB Health” app on your smart device and sign up a new account.
4. Make sure the Bluetooth feature of the monitor is on.
To turn on/off the Bluetooth feature of the monitor, press [ ] or [M] button to standby mode. Press and hold
[M] button to enter the setting mode.
5. Click the [ ] icon on the app and click “Setup Bluetooth Device”. Select your monitor model on the device
list and then all the measurement data will be sent to your smart device automatically.
Transfer the measurement data
1. Make sure the monitor is within 5m of your smart device and the “G.LAB Health” app is active.
2. Make sure the Bluetooth feature of the monitor is on. Press [M] button to enter AVG mode, Bluetooth icon is
flashing on the display.
3. Click the [ ] icon on the app to get the new measurement data from your monitor.
Notes:
• If data transmission fails, error code “E7” will be shown. Check the Bluetooth feature of the monitor and your
smart device.
• The monitor comes with the Bluetooth already turned on as default. Please turn off the Bluetooth in the monitor
in the areas where use of wireless equipment is prohibited.