User's Manual

17
TO MEASURE YOUR BLOOD PRESSURE
1. Follow the instruction in “BEFORE MEASURING BLOOD
PRESSURE” to make yourself ready.
2. Press [ ] button to turn the device from clock mode to
standby mode.
Press and hold [ ] button to enter user selection mode
(Model: MD5940/ MD5950/ MD5960/ MD5970/ MD5980/ MD5990)
Press [M] button to to select user memory 1 or 2. Confirm selection
by pressing [ ] button.
3. Press [ ] to start the blood pressure measurement.
4. The cuff starts to inflate. It is normal for the cuff to feel very tight.
A pressure bar indicator is displayed during measurement. See
“PRESSURE BAR INDICATOR” for more details.
5. When inflation is complete, deflation starts automatically. Once
the pulse is detected, the [ ] blinks with each pulse beat,
indicating that the measurement is in progress.
6. When the measurement is complete, the systolic and diastolic
pressure and pulse rate are displayed and stored. At the same
time, the cuff exhausts the remaining air and deflates completely.
NOTE:
You can stop inflation by pressing [ ] button at any time.
Record number and
User ID are displayed
Inflation will start
Inflation in progress
Measurement result shown
[ ] icon blinks