User's Manual

11
TO SET DATE / TIME (Model: MD5900 / MD5910 / MD5940 / MD5950)
When new batteries are installed
1. “YEAR” will blink on the display.
2. Press [M] key to set the current Year.
3. Press [ ] key to confirm and then "MONTH" will start to blink.
4. Press [M] key to set the current Month.
5. Press [ ] key to confirm and then "DAY" will start to blink.
6. Press [M] key to set the current Day.
7. Press [ ] key to confirm and then "HOUR" will start to blink.
8. Press [M] key to set the current Hour.
9. Press [ ] key to confirm and then "MINUTE" will start to blink.
10. Press [M] key to set the current Minute.
11. Press [ ] key to confirm. Date and time setting is completed.
When device is in Clock Mode
1. Press [ ] or [M] key to Standby Mode.
2. Press and hold [M] key for about 5 seconds
until "YEAR" blinks on the display.
3. Follow the same procedure above to set the
date and time.
Clock Mode Standby Mode