Use Instructions

Measurement
• Now select the desired user memory by pressing the
M1 or M2 memory buttons. If you do not select a user
memory, the measurement is stored in the most re-
cently used user memory. The relevant
or symbol
appears on the display.
• Press the START/STOP button to switch off the
blood pressure monitor. The measurement is then
stored in the selected user memory.
• If the device is not switched off manually, it will switch
off automatically after 3 minutes.
If Bluetooth
®
data transfer has been activated, data is
by transferred after having confirmed the user memory by
pressing the pressing the START/STOP button
.
• The Bluetooth
®
symbol flashes on the display. The
blood pressure monitor now attempts to connect to the
app for approx. 30 seconds.
• The Bluetooth
®
symbol stops flashing as soon as
a connection is established. All measurement data is
automatically transferred to the app. Once the data has
been successfully transferred, the device switches off.
If the data transfer was unsuccessful, “
” appears
on the display.
• If a connection to the app cannot be established after
30 seconds, the Bluetooth
®
symbol goes out and the
blood pressure monitor switches off automatically after
Measurement
Please note that you must add the blood pressure
monitor in "My devices" in the "HealthCoach" app to
enable data transfers. The "HealthCoach" app must
be active to allow data transfer.
If the latest data is not displayed on your smart-
phone, repeat the data transfer as described in
chapter 7.
If you forget to turn off the blood pressure monitor, it will
switch off automatically after approximately 3 minutes. In
this case too, the value is stored in the selected or most
recently used user memory and the data is transferred
automatically after 3 minutes if Bluetooth
®
data transfer
has been activated.
• Wait at least 5 minutes before taking an-
other measurement.
6. Evaluating results
Irregular heartbeat:
This device can identify potential disruptions of the heart
rhythm when measuring and if necessary, indicates this after
the measurement with the symbol .
This can be an indicator for irregular heartbeat. Irregular heartbeat
is a condition in which the heart rhythm is
abnormal because of
flaws in the bioelectrical system that regulates the heartbeat. The
symptoms (skipped or premature heart beats, pulse being slow or
too fast) can be caused by factors such as heart disease, age,
physical