Use Instructions

Delete the measured values
• To clear the memory of the relevant user memory, you
must first select a user memory.
• Start the retrieval of the average measured values.
A ashes on the display and the average value of all
saved measured values in this user memory is dis-
played.
• Press and hold the memory button M1 or M2 for 5
seconds depending on the user memory you are in.
All the values in the current user memory are
deleted.
If Bluetooth
®
is activated (the symbol ash-
es on the display), the blood pressure monitor
attempts to connect to the app. When the
symbol
is ashing, it is not possible to de-
lete all values from the selected user memory.
Deleting individual measurements
T o clear individual measurements from the relevant user
memory, you must first select a user memory.
• Start the retrieval of the individual measured values.
• Press and hold the memory button M1 or M2 for 5
seconds (depending on the user memory you are in).
• The selected value is deleted. The device briey dis-
plays CL 00.
• If you would like to delete other values, repeat the pro-
cess described above.
You can switch off the device at any time by pressing the
START/STOP
button.
Transfer via Bluetooth
®
Smart
It is also possible to transfer the measured values saved on the
device to your smartphone using Bluetooth
®
Smart.
You will need the HealthCoach app for this. The app is availa-
ble from the App Store.
Proceed as follows to transfer values:
If Bluetooth
®
is activated in the settings menu, the data is
transferred automatically after the measurement. The
symbol
appears in the top left of the display (see chapter 4 „Preparing
the measurement“).
Step 1: MD4300
Activate Bluetooth
®
on your device (see
chapter 4 "Preparing the measurement“, Blue -
tooth
®
).
Step 2: "HealthCoach" app
In the HealthCoach app, add the MD4300 under
"Settings/My devices".
Step 3: MD4300
take a measurement.