Use Instructions

User memory
• To view the measurement data for user
memory
, press the M2 memory button.
The ave
rage of all measurements appears
on the display.
If Bluetooth
®
is activated (the symbol
ashes on the display), the blood pressure
monitor attempts to connect to the app. If
you press the
M1 button in the meantime,
the transfer is cancelled and the average
values for morning measurements are
displayed. If you press the M2 button, the
transfer is cancelled and the measurement
data of user memory is displayed. The
symbol is no longer shown. The buttons
are deactivated as soon as a connection is
established and the data is transferred.
Average values
Press the M1 button if you have selected
user memory 1.
Press the M2 memory button if you have
flashes on the display.
The average value of all saved measured
values in this user memory is displayed.
• Press the relevant memory button ( M1 or M2 ).
Average values
ashes on the display.
The average value of the morning measure-
ments for the last 7 days is displayed (morn-
ing: 5.00 a.m. – 9.00 a.m.).
P ress the relevant memory button (M1 or M2 ).
ashes on the display.
The average value of the evening meas-
urements for the last 7 days is displayed
(evening: 6.00 p.m. – 8.00 p.m.).
Individual measured values
W hen the relevant memory button (M1 or
M2 ) is pressed again, the last individual
measurement is displayed (in this example,
measurement 03).
W hen the relevant memory button (M1 or M2 ) is pressed
again, you can view your individual measurements.
• To switch the device off again, press the START/STOP
button
.
If you forget to turn off the blood pressure monitor, it
You can exit the menu at any time by pressing the
START/STOP button
.