Administration Guide

P a g e | 45
IPVT10 Administration Guide
Version 1.0.4.12
Figure 17: Service IP Address Config – Internal Network Adapter
7. When two network adapters are configured, users have to configure the routing rules based on the
actual requirements by clicking icon . Multiple routing rules can be configured in the
IPVT10 server. Users can also edit and delete a certain routing rule.
Note: Routing rules must be specified for the external network and all network segments in the
enterprise network environment.
Figure 18: Configure Network Routing Rules
Table 13: Configure Network Routing Rules
Parameters
Description
Destination IP Address
This is used to configure the destination IP address for the network. This
option has to be configured with the Subnet Mask option.
Subnet Mask
This is used to configure the subnet mask.
Gateway
This is used to configure the gateway of the destination network.
Network Adapter
This is used to select the server network adapter for destination network.