Administration Guide

P a g e | 47
HT813 Administration Guide
Version 1.0.3.12
SDP
incoming SDP. Default is No.
Ring Timeout
Stops ringing when incoming call if not answered within a specific period of
time. Default is 60 seconds.
Delayed Call Forward Wait
Timeout
Forwards incoming call if not answered within a specific period of time when
delayed call forward is activated locally (using *92 code). Default value is 20
seconds.
No Key Entry Timeout
Initiates the call within this time interval if no additional key entry during dialing
stage. Default is 4 seconds.
Early Dial
Sends an early INVITE each time a key is pressed when a user dials a
number. Otherwise, only one INVITE is sent after full number is dialed (user
presses Dial Key or after “no key entry timeout” expires).
This option should be used only if there is a SIP proxy is configured and
supporting 484 responses (Incomplete Address). Otherwise, the call will likely
be rejected by the proxy (with a 404 Not Found error). Default is No.
This feature is NOT designed to work with and should NOT be enabled for
direct IP-to-IP calling.
Dial Plan Prefix
Adds specified prefix to dialed number.
Use # as Dial Key
Treats “#” as the “Send” (or “Dial”) key. If set to “No”, this “#” key can be
included as part of the dialed number.
Default is Yes.