Datasheet
High Availability Controller for UCM6510
The HA100 oers an automated failover solution for the UCM6510 IP PBX. When connecting between
two UCM6510, the HA100 constantly monitors the operation status of both UCM6510 and automatically
switches the system control (including all of the connected telecom lines, network links, auxiliary devices,
and all of the SIP endpoints previously registered on the primary UCM6510) to the hot-standby secondary
UCM6510 in the event that the primary UCM6510 fails. It can complete the entire system switch between 10
and 50 seconds depending on the number of registered SIP endpoints. Thanks to its smart monitoring and
automated failover capability, the HA100 is an ideal high-availability solution for the UCM6510 to ensure
maximum total system reliability and uptime.
Smart failover solution
that automatically
switches to a hot-
standby secondary
UCM6510 if the primary
one fails.
Up to 14 LED indicators
showing real-time status
of all of the telecom
lines, network links,
auxiliary devices, etc.
www.grandstream.com
HA100
Gratuitous ARP forces
SIP endpoints to refresh
the MAC address of the
new UCM6510 without
interruptions.
Fast 10 to 50 second
system switching time
depending on the
number of registered
endpoints.
Connects and
constantly monitors
two UCM6510 together
for high availability.