User Guide

P a g e | 38
GXP16XX User Guide
Version 1.0.4.88
Note: If the following feature codes do not work on your phone, please contact Administrator to turn on the
“Enable Call Features” on phone’s Web GUI. Enable Call Features is under phone’s Web
GUIAccountCall Settings tab.
GDS Surveillance Action Key Support
The GXP16XX can be integrated with the GDS3710 IP Video Door System. The new integration allows
users to interact with the GDS3710 while in call and send OpenDoor request via Softkey to open the door
remotely.
Assuming that remote number and PIN is set under GDS doorbell settings, the following configuration
needs to be done on the phone WebGUI, under “Settings  External Service”:
1. Account: Select the Account to be used while sending the OpenDoor request.
2. System Identification: Specify a name or a number to identify the GDS3710.
3. System Number: Specify the SIP extension or the IP address of the GDS3710.
4. Access Password: Specify Remote PIN configured on the GDS3710.
During a call between the GXP16XX and the GDS3710, a softkey named “OpenDoor” will popup, user can
click on this softkey to send the OpenDoor request to the GDS3710. If the password set on “Access
Password” matches the “Remote PIN to open door” on the GDS, the door will be successfully opened.
Figure 6: OpenDoor Request