User Guide
Table Of Contents
- DOCUMENT PURPOSE
- CHANGE LOG
- GUI INTERFACE EXAMPLES
- WELCOME
- PRODUCT OVERVIEW
- GETTING STARTED
- CONFIGURATION GUIDE
- Obtain HT801/HT802 IP Address via Connected Analogue Phone
- Understanding HT801/HT802 Interactive Voice Prompt Response Menu
- Configuration via Web Browser
- NAT Settings
- DTMF Methods
- Preferred Vocoder (Codec)
- Configuring the HT801/HT802 Through Voice Prompts
- Register a SIP Account
- Rebooting the HT801/HT802 from Remote
- CALL FEATURES
- CALL OPERATIONS
- RESTORE FACTORY DEFAULT SETTINGS
- EXPERIENCING HT801/HT802
P a g e | 21
HT801/HT802 User Guide
Version 1.0.5.11
3. Press Login to access your settings and navigate to Basic Settings > End User Password.
4. Enter the new user password.
5. Confirm the new end-user password.
6. Press Apply at the bottom of the page to save your new settings.
Figure 8: User Level Password
Changing Viewer Password
1. Access your HT801/HT802 web UI by entering its IP address in your favorite browser.
2. Enter your admin password (default: admin).
3. Press Login to access your settings.
4. Go to Basic Settings New Viewer Password and enter the new viewer password.
5. Confirm the new viewer password.
6. Press Apply at the bottom of the page to save your new settings.
Figure 9: Viewer Level Password
Changing HTTP Web Port
1. Access your HT801/HT802 web UI by entering its IP address in your favorite browser.
2. Enter your admin password (default: admin).
3. Press Login to access your settings and navigate to Basic Settings > Web Port.
4. Change the current port to your desired/new HTTP port. Ports accepted are in range [1-65535].
5. Press Apply at the bottom of the page to save your new settings.