User Manual
Grandstream Networks, Inc. GXV3500 User Manual Page 38 of 82
Firmware Version 1.0.1.94 Last Updated: 05/2016
Registered: SIP registration status. Display “Online” in Green, “Offline” in Red.
Unregistered on Reboot: If checked and SIP server support, reboot camera will unbind all
registered end points using this SIP account.
Account Name: SIP account name used for self identification.
SIP Server: FQDN or IP of SIP server from VoIP service provider
Outbound Proxy: IP or FQDN of Outbound proxy server, helps penetrate NAT/Firewall
SIP User ID: SIP username, or telephone number from ITSP
Authenticate ID: Authenticate ID used by SIP proxy
Authenticate Password: Authenticate password used by SIP proxy
STUN Server: STUN server used to resolve NAT if have
Steam: Which stream used for SIP call. Default 2
nd
stream, strongly recommended
due to bandwidth and data involved at video call.
Preferred Vocoder: Audio codec used for SIP call, only G.711 A or U supported.
Registration Expiration: Registration expiration time, default 3600 seconds
Local SIP Port: Local SIP port, default 5060
Local RTP Port: Local RTP port for media, default 5004
Auto On-Hook Timer: Timer (in seconds) for automatic disconnecting the SIP call. Default 300.
Disable Audio in SIP Call: Disable or turn off audio of camera when SIP call established.
Enable Keep Alive: Checked to help NAT resolution, sending alive packets.
Accept Direct IP Call: Check to accept peer-to-peer IP call in LAN without SIP server.
Enable White List Number Filter: Check to allow only white list number to call in, for security.
Enable two-way SIP Calling: Check to enable two-way audio when call established (Default)
SIP Proxy Compatibility Mode: Check to enable more proxy compatibility with cost of bandwidth,
the SIP call will send both audio and video no matter what.
Self-define Warning Audio: Upload self-defined alarm warning message audio.
(Format: G.711 .WAV format, File Size <= 300KB, Linear PCM,
8KHz Sampling Rate, 16bit, Single Channel)