User Guide

P a g e | 68
GXP21XX User Guide
Version 1.0.9.26
• Cancel Conference.
➢ If after pressing the CONF key, the user decides not to conference, press Cancel softkey or the
current active LINE key (LED in solid green);
➢ This will resume the 2-way conversation with the current line.
• Split and Re-conference.
➢ During the conference, press HOLD key. The conference call will be split and the calls will be put
on hold separately with the LINE keys blinking in green;
➢ Select 1 LINE key and press to resume the 2-way conversation;
➢ If users would like to re-establish conference call, before 1 separate LINE is selected, press the
ReConf softkey right after the conference call is held/split;
• End Conference.
➢ Press HOLD key to split the conference call. The conference call will be ended with both calls on
hold; Or
➢ Users could press the EndCall softkey or simply hang up the call to terminate the conference call.
GXP2130/GXP2140/GXP2160/GXP2170/GXP2135 supports Easy Conference Mode, which can be used
combined with the traditional way to establish the conference.
• Initiate a conference call.
➢ Establish 1 call;
➢ Press CONF key and a new line will be brought up using the same account;
➢ Dial the number and press SEND key to establish the second call;
➢ Press CONF key or press the ConfCall softkey to establish the conference.
• Join more parties in established conference call.
➢ Establish conference call;
➢ Press CONF key and a new line will be brought up using the same account;
➢ Dial the number and press SEND key to establish the second call;
➢ Press CONF key or press the ConfCall softkey to join the new party in the established conference.
• Split and Re-conference.
➢ During the conference, press HOLD key. The conference call will be split and both calls will be put
on hold separately with 2 LINE keys blinking in green;
➢ Select 1 LINE key and press to resume the 2-way conversation;
➢ If users would like to re-establish conference call, before 1 separate LINE is selected, press the
ReConf softkey right after the conference call is split.
• Cancel Conference.
➢ If user decides not to conference after establishing the second call, press EndCall softkey instead
of the ConfCall softkey/CONF key;
➢ This will end the second call and the screen will show the first call on hold.
• End Conference.
➢ Press HOLD key to split the conference call. The conference call will be ended with both calls on
hold; Or
➢ Users could press the EndCall softkey or simply hang up the call to terminate the conference call.