Application Guide

P a g e | 90
DP750/DP720 Administration Guide
Version 1.0.3.37
Figure 38: Repeater Status – Associated (Manual Association)
Note: Make sure that Repeater Mode is enabled on your DP750 Base Station.
Use DP750 Repeater Management to Associate DP760
❖ Enabling Repeater Management Mode
The following steps illustrate how to enable and use the Repeater Management mode on DP750:
1. Access the Web GUI of your DP750 using the admin’s username and password. (Default username
and password are admin/admin).
2. Navigate to DECT  General Settings and set Enable Repeater Management to Yes.
3. Press Save and Apply, then reboot the unit to apply the new settings.