Application Guide

P a g e | 74
DP750/DP720 Administration Guide
Version 1.0.3.37
Figure 25: Account Status – Line Status
Outgoing Default Line
When a Handset is configured with more than one line, users can change the
default outgoing line on DP720 Handset using keypad Menu  Call Settings
 Outgoing Default Line, see next screenshot
Hunting Groups
DP750 supports 3 types of hunting groups as described below:
In the examples below, we consider that all handsets are in same hunting group and only the type of hunting
group differs.
▪ Circular: The base station will note which handset answered the last call, and forward the call to the
next available handset in round-robin fashion.
In the example below; the 1
st
incoming call was sent to HS1 since all handsets were available; 2
nd
incoming call will be sent to HS2 since previous call was answered by HS1 and HS2 is the next available
handset in the list; 3
rd
will be sent to HS4 since HS2 was the last one answering the call and HS3 is
busy making an outgoing call (if HS3 was available, the call will be sent to HS3).