Application Guide

P a g e | 70

DP750/DP720 Administration Guide

Version 1.0.3.37

Figure 20: Locate Handset via Web UI

Locate via DP750 Base station

1. On DP750 Base station back side, press Radio/Page button .

2. All registered handsets will receive Paging call.

3. Once located, you can end the paging calling by pressing any key on the handsets or by pressing

again Radio/Page button.

DP750 supports up to 10 SIP accounts, 5 handsets. Each Handset can be configured up to 10 accounts.

Please be aware that line settings will be affected by DID settings (hunting group settings) in “DECT - SIP

Account Settings”.

1. Access the Web GUI of your DP750 using the admin’s username and password. (Default username

and password is: admin/admin).

2. Press Login to access your settings and navigate to Profiles tab and select a profile to use.

DP750 supports up to 4 profiles. A profile is a set of settings including general settings, network settings,

SIP setting, audio setting, call settings and ring tones, etc.

A profile can be used with different SIP accounts.