Application Guide

P a g e | 61
DP750/DP720 Administration Guide
Version 1.0.3.37
7. negotiated codec (INFO level)
8. Ethernet link up (INFO level)
9. SLIC chip exception (WARNING and ERROR levels)
10. memory exception (ERROR level)
The Syslog uses USER facility. In addition to standard Syslog payload, it contains
the following components: GS_LOG: [device MAC address] [error code] error
message.
Example: May 19 02:40:38 192.168.1.14 GS_LOG: [00:0b:82:00:a1:be][000]
Ethernet link is up
Print SIP in Syslog
Includes full SIP messages in syslog.
Packet Capture
Status
Displays packet capture status. When user starts to capture trace file, it will show
“RUNNING” status, otherwise, it will show “STOPPED”.
With RTP Packets
Defines whether packet capture file contains RTP or not. Default setting is No.
Factory Reset
Force Reboot
Kills active processes and forces the reboot of DP750 base station.
Configure Web UI
Button
Reset Type
Specifies the type of reset to perform via the Web UI reset button:
- There are 3 reset type for Web UI button:
1. Full Factory Reset: Reset all the settings.
2. NVRAM Settings Only: Reset all the settings except
subscription information, so the handset will stay in subscribed
after reset, but all the other settings like account info, call
settings, audio settings, etc., will be reset.
3. DECT Settings Only: Reset only the subscription (wipe out all
the subscription information), but keep all the other settings like
account, SIP settings.
Perform
Selected
Reset
Press Reset button to reset settings based on the reset type
selected.