Application Guide

P a g e | 62
DP750/DP720 Administration Guide
Version 1.0.3.37
Configure Hardware
Button
Reset Type
Specifies the type of reset to perform via hardware button:
- There are 4 reset types for hardware button:
1. Full Factory Reset: Reset all the settings.
2. NVRAM Settings Only: Reset all the settings except
subscription information, so the handset will stay in subscribed
after reset, but all the other settings like account info, call
settings, audio settings, etc. will be reset.
3. DECT Settings Only: Reset only the subscription (wipe out all
the subscription information), but keep all the other settings like
account, SIP settings.
4. Disabled: Disable the hardware button to factory reset the base
for security purpose.
Support - Support Documentation
Online Support
Redirects users to tools page and DP7xx product pages available on Grandstream
official website.
Offline Support
Allows users to download the drilling templates.
Support - Configuration Support
Download Default
Device Configuration
Downloads the default device configuration file in .txt and .XML formats.
Download UCM Zero
Config Template
Download the zero config templates files for UCM firmware version before and
after 1.0.10.39.
Support - Debug Tools
Remote Log
Submission - Terms
& Conditions
Agree to
terms?
By clicking the submit button, you agree to terms and conditions
for submitting debug logs and allow the device to send these files
to Grandstream to be used for troubleshooting purposes.
Note: Grandstream will not collect any information without
customers acknowledged and permissions.
Email
Address
Configures email field for core collection tools. Users can leave a
contact email to get feedbacks.
Comments
Includes a comment with information regarding the use of the
device when the problem occurred. As an alternative to the device
submitting the files, you may download the files below and submit
them to Grandstream manually.