User's Manual
Firmware Version 1.0.0.5 
UCM6510 IP PBX User Manual 
Page 85 of 192 
automatically modify the remote contacts by adding this prefix. 
Register SIP Trunk Configuration Parameters 
Provider Name 
Configure the provider name for the VoIP trunk. This is a unique label to 
identify the trunk when listed in outbound rules, inbound rules and etc. 
Host Name 
Configure  the  IP  address  or  URL  for  the  VoIP  provider  server  of  the 
trunk. 
Transport 
Configure the SIP transport protocol to be used in this trunk. The default 
setting is "All - UDP Primary". 
  UDP Only 
  TCP Only 
  TLS Only 
  All - UDP Primary: UDP is the primary transport protocol when all 
the other SIP transport methods are available too. 
  All - TCP Primary: TCP is the primary transport protocol when all the 
other SIP transport methods are available too. 
  All - TLS Primary: TLS is the primary transport protocol when all the 
other SIP transport methods are available too. 
Keep Trunk CID 
When  enabled,  it  can  avoid  overridden  by  extension's  CID  if  the 
extension has CID configured. The default setting is enabled. 
Username 
Enter the username to register to the trunk from the provider. 
Password 
Enter the password to register to the trunk from the provider. 
Auth ID 
This is the authentication ID for the UCM6510 to register to the trunk if 
required by the provider. If not specified, the CallerID name will be sued 
for authentication. 
Codec Preference 
Select audio and video codec for the VoIP trunk. The available codecs 
are:  PCMU,  PCMA,  GSM,  AAL2-G.726-32,  G.726,  G.722,  G.729, 
G.723, ILBC, ADPCM, H.264, H.263, H.263p. 
From Domain 
Configure  the  actual  domain name  where  the  extension  comes  from. 
This can be used to override the From Header. 
For  example,  "trunk.UCM6510.provider.com"  is  the  From  Domain  in 
From Header: sip:1234567@trunk.UCM6510.provider.com. 
From User 
Configure the actual user name of the extension. This can be used to 
override the From Header. There are cases where there is a single ID 
for registration (single trunk) with multiple DIDs. 
For  example,  "1234567"  is  the  From  User  in  From  Header: 
sip:1234567@trunk.UCM6510.provider.com. 










