User's Manual

Firmware Version 1.0.0.5
UCM6510 IP PBX User Manual
Page 66 of 192
Click on to send NOTIFY reboot event to the device which has an UCM6510 extension already
registered. To successfully reboot the user, "Zero Config" needs to be enabled on the UCM6510 web
GUI->PBX->Basic/Call Routes->Zero Config->Auto Provisioning Settings.
 Delete single extension
Click on to delete the extension. Or select the checkbox of the extension and then click on "Delete
Selected Extensions".
 Modify selected extensions
Select the checkbox for the extension(s). Then click on "Modify Selected Extensions" to edit the
extensions in a batch.
 Delete selected extensions
Select the checkbox for the extension(s). Then click on "Delete Selected Extensions" to delete the
extension(s).
EXPORT EXTENSIONS
The extensions configured on the UCM6510 can be exported to csv format file with selected technology
"SIP", "IAX" or "FXS". Click on "Export Extensions" button and select technology in the prompt.
Figure 22: Export Extensions
The exported csv file can also serve as a template for users to fill in desired extension information to be
imported to the UCM6510.