User's Manual

Firmware Version 1.0.0.5
UCM6510 IP PBX User Manual
Page 50 of 192
CREATE NEW DEVICE
Users could also directly create a new device and assign the extension before the device is discovered by
the UCM6510. Once the device is plugged in, it can then be discovered and provisioned by the UCM6510.
Click on "Create New Device" and the following dialog will show. Enabled Hot-Desking (optional), fill in the
MAC address (required), IP address (optional), Version (optional), Model (optional) and the extension
(required) to assign to the device. Click on "Save" to add the device to the provision list.
Figure 21: Create New Device
PROVISIONING
After the successful discovery and assignment configuration on the UCM6510, the device will start
downloading the config file and take the new configuration with the extension registered.