User's Manual

Firmware Version 1.0.0.5
UCM6510 IP PBX User Manual
Page 42 of 192
Figure 14: UCM6510 Email Settings: Send Test Email
TIME SETTINGS
The current system time on the UCM6510 is displayed on the upper right of the web page. It can also be
found under web GUI->Status->System Status->General.
To configure the UCM6510 to update time automatically, go to web GUI->Settings->Time Settings-> Auto
Time Updating.
Table 15: Auto Time Updating
Remote NTP Server
Specify the URL or IP address of the NTP server for the UCM6510 to
synchronize the date and time. The default NTP server is
ntp.ipvideotalk.com.
Enable DHCP Option 2
If set to "Yes", the UCM6510 is allowed to get provisioned for Time Zone
from DHCP Option 2 in the local server automatically. The default
setting is "Yes".
Enable DHCP Option 42
If set to "Yes", the UCM6510 is allowed to get provisioned for NTP
Server from DHCP Option 42 in the local server automatically. This will
override the manually configured NTP Server. The default setting is
"Yes".
Time Zone
Select the proper time zone option so the UCM6510 can display correct