User's Manual

Firmware Version 1.0.0.5
UCM6510 IP PBX User Manual
Page 32 of 192
Figure 6: Create New Firewall Rule
Table 10: Firewall Rule Settings
Rule Name
Specify the Firewall rule name to identify the firewall rule.
Action
Select the action for the Firewall to perform.
 ACCEPT
 REJECT
 DROP
Type
Select the traffic type.
 IN
If selected, users will need specify the network interface "LAN", "WAN" or
"Both" for the incoming traffic.
 OUT
Service
Select the service type.
 FTP
 SSH
 Telnet
 TFTP
 HTTP
 LDAP
 Custom
If selected, users will need specify Source (IP and port), Destination (IP
and port) and Protocol (TCP, UDP or Both) for the service.
Save the change and click on "Apply" button. Then submit the configuration by clicking on "Apply Changes"
on the upper right of the web page. The new rule will be listed at the bottom of the page with sequence
number, rule name, action, protocol, type, source, destination and operation. Users can click on to edit
the rule, or select to delete the rule.