User's Manual

Firmware Version 1.0.0.5
UCM6510 IP PBX User Manual
Page 22 of 192
 Hardware Testing
Select "Test SVIP" to perform SVIP test on the device. This is mainly for
factory testing purpose which verifies the hardware connection inside the
device. The diagnostic result displays on the LCD after the test is done.
Web Info
 Protocol: Web access protocol. HTTP or HTTPS. By default it's HTTPS
 Port: Web access port number. By default it's 8089
USE THE LED INDICATORS
The UCM6510 has LED indicators in the front to display connection status. The following table shows the
status definitions.
Table 4: UCM6510/UCM6510 LED INDICATORS
USE THE WEB GUI
ACCESS WEB GUI
The UCM6510 embedded Web server responds to HTTP/HTTPS GET/POST requests. Embedded HTML
pages allow users to configure the device through a Web browser such as Microsoft IE, Mozilla Firefox,
Google Chrome and etc.
LED Indicator
LED Status
Power 1/Power 2
PoE
LAN
WAN
USB
SD
T1/E1/J
Phone 1 /Phone 2 (FXS)
Line 1/Line 2 FXO
Solid: Connected
Fast Blinking: Data Transferring
Slow Blinking: Trying to connect
OFF: Not Connected