User's Manual

Firmware Version 1.0.0.5
UCM6510 IP PBX User Manual
Page 167 of 192
3. Memory Usage
Figure 78: System Events->Alert Events Lists: Memory Usage
 Detect Cycle: The UCM6510 will perform the memory usage detection based on this cycle. Users
can enter the number and then select second(s)/minute(s)/hour(s)/day(s) to configure the cycle.
 Alert Threshold: If the detected value exceeds the threshold (in percentage), the UCM6510
system will send the alert.
4. System Reboot
Figure 79: System Events->Alert Events Lists: System Reboot
 Detect Cycle: The UCM6510 will check the system reboot based on this cycle. Users can enter the
number and then select second(s)/minute(s)/hour(s)/day(s) to configure the cycle.
5. System Update
Figure 80: System Events->Alert Events Lists: System Update
 Detect Cycle: The UCM6510 will check the system update based on this cycle. Users can enter
the number and then select second(s)/minute(s)/hour(s)/day(s) to configure the cycle.