User's Manual

Firmware Version 1.0.0.5
UCM6510 IP PBX User Manual
Page 166 of 192
SYSTEM EVENTS
The UCM6510 can monitor important system events, log the alerts and send Email notifications to the
system administrator.
ALERT EVENTS LIST
The system alert events list can be found under web GUI->Status->System Events->Alert Events List.
Click on to configure the parameters for each event.
1. Disk Usage
Figure 76: System Events->Alert Events Lists: Disk Usage
 Detect Cycle: The UCM6510 will perform the internal disk usage detection based on this cycle.
Users can enter the number and then select second(s)/minute(s)/hour(s)/day(s) to configure the
cycle.
 Alert Threshold: If the detected value exceeds the threshold (in percentage), the UCM6510
system will send the alert.
2. Modify Admin Password
Figure 77: System Events->Alert Events Lists: Modify Admin Password
 Detect Cycle: The UCM6510 will initiate the admin password check based on this cycle. Users can
enter the number and then select second(s)/minute(s)/hour(s)/day(s) to configure the cycle.