User's Manual

Firmware Version 1.0.0.5
UCM6510 IP PBX User Manual
Page 144 of 192
The above recorded call's recording files are also listed under the UCM6510 web GUI->CDR->Recording
Files.
CALL PARK
The UCM6510 provides call park and call pickup features via feature code.
PARK A CALL
There are two feature codes that can be used to park the call.
 Feature Maps->Call Park (Default code #72)
During an active call, press #72 and the call will be parked. Parking lot number (default range 701 to
720) will be announced after parking the call.
 Feature Misc->Call Park (Default code 700)
During an active call, initiate blind transfer (default code #1) and then dial 700 to park the call. Parking
lot number (default range 701 to 720) will be announced after parking the call.
RETRIEVE THE PARKED CALL
To retrieve the parked call, simply dial the parking lot number and the call will be established. If a parked call
is not retrieved after the timeout, the original extension who parks the call will be called back.