User's Manual

Firmware Version 1.0.0.5
UCM6510 IP PBX User Manual
Page 141 of 192
callee.
Call Park
 Default code: #72.
 Enter the code during active call to park the call.
 Options
Disable
Allow Caller: Enable the feature code on caller side only.
Allow Callee: Enable the feature code on callee side only.
Allow Both: Enable the feature code on both caller and
callee.
Audio Mix Record
 Default code: *3.
 Enter the code followed by # or SEND to start recording the
audio call and the UCM6510 will mix the streams natively on
the fly as the call is in progress.
 Options
Disable
Allow Caller: Enable the feature code on caller side only.
Allow Callee: Enable the feature code on callee side only.
Allow Both: Enable the feature code on both caller and
callee.
DND/Call Forward
Do Not Disturb (DND) Activate
 Default code: *77.
Do Not Disturb (DND) Deactivate
 Default code: *78.
Call Forward Busy Activate
 Default Code: *90.
 Enter the code and follow the voice prompt. Or enter the code
followed by the extension to forward the call.
Call Forward Busy Deactivate
 Default Code: *91.
Call Forward No Answer Activate
 Default Code: *92.
 Enter the code and follow the voice prompt. Or enter the code
followed by the extension to forward the call.
Call Forward No Answer
Deactivate
 Default Code: *93.
Call Forward Unconditional
Activate
 Default Code: *72.
 Enter the code and follow the voice prompt. Or enter the code
followed by the extension to forward the call.
Call Forward Unconditional
Deactivate
 Default Code: *73.
Feature Misc
Feature Code Digits Timeout
 Default Setting: 1000.