User's Manual

Firmware Version 1.0.0.5
UCM6510 IP PBX User Manual
Page 125 of 192
PICKUP GROUPS
The UCM6510 supports pickup group feature which allows users to pick up incoming calls for other
extensions if they are in the same pickup group, by dialing "Pickup Extension" feature code (by default *8).
CONFIGURE PICKUP GROUPS
Pickup groups can be configured via web GUI->PBX->Call Features->Pickup Groups.
 Click on "Create New Pickup Group" to create a new pickup group.
 Click on to edit the pickup group.
Select extensions from the list on the left side to the right side.
Figure 53: Edit Pickup Group
 Click on to delete the pickup group.