User's Manual

Firmware Version 1.0.0.5
UCM6510 IP PBX User Manual
Page 119 of 192
 Click on to delete the paging/intercom group.
 Click on "Paging/Intercom Group Settings" to edit Alert-Info Header. This header will be included in the
SIP INVITE message sent to the callee in paging/intercom call.
Figure 48: Page/Intercom Group Settings
 The UCM6510 has pre-configured paging/intercom feature code. By default, the Paging Prefix is *81
and the Intercom Prefix is *80. To edit page/intercom feature code, click on "Feature Codes" in the
"Paging/Intercom Group Settings" dialog. Or users could go to web GUI->PBX->Internal
Options->Feature Codes directly.