User's Manual

Firmware Version 1.0.0.5
UCM6510 IP PBX User Manual
Page 118 of 192
PAGING AND INTERCOM GROUP
The UCM6510 paging and intercom can be used via feature code to a single extension or a paging/intercom
group. This sections describes the configuration of paging/intercom group under web GUI->PBX->Call
Features->Paging/Intercom.
CONFIGURE PAGING/INTERCOM GROUP
 Click on "Create New Paging/Intercom Group" to add paging/intercom group.
Figure 47: Paging/Intercom Group
Table 38: Paging/Intercom Group Configuration Parameters
Name
Configure paging/intercom group name.
Extension
Configure the paging/intercom group extension.
Type
Select "2-way Intercom" or "1-way Page".
Page/Intercom Group
Members
Select available users from the left side to the paging/intercom group
member list on the right.
 Click on to edit the paging/intercom group.