User's Manual Part 2

Firmware Version 1.0.0.1 UCM6200 Series IP PBX User Manual Page 247 of 320
1. Group Name
Enter the Group Name. This is to identify the Dial By Name group. The Dial By Name group can be
used as the destination for inbound route and key pressing event for IVR. The group name defined
here will show up in the destination list when configuring IVR and inbound route. If Dial By Name is set
as a key pressing event for IVR, user could use ‘*’ to exit from Dial By Name, then re-enter IVR and
start a new event. The following example shows how to use this option.
Figure 147: Dial By Name Group In IVR Key Pressing Events