User's Manual Part 2

Firmware Version 1.0.0.1 UCM6200 Series IP PBX User Manual Page 223 of 320
The extension's Email address or the Fax's default Email address needs
to be configured in order to receive Fax from Email. If neither of them is
configured, Fax will be not be received from Email.
Template Variables
Fill in the "Subject:" and "Message:" content, to be used in the Email
when sending the Fax to the users.
The template variables are:
 ${CALLERIDNUM} : Caller ID Number
 ${CALLERIDNAME} : Caller ID Name
 ${RECEIVEEXTEN} : The extension to receive the Fax
 ${FAXPAGES} : Number of pages in the Fax
 ${VM_DATE} : The date and time when the Fax is received
 Click on
to edit the Fax extension.
 Click on
to delete the Fax extension.
SAMPLECONFIGURATIONTORECEIVEFAXFROMPSTNLINE
The following instructions describe how to use the UCM6200 to receive Fax from PSTN line on the Fax
machine connected to the UCM6200 FXS port.
1. Connect Fax machine to the UCM6200 FXS port.
2. Connect PSTN line to the UCM6200 FXO port.
3. Go to web GUI->PBX->Analog Trunks page.
4. Create or edit the analog trunk for Fax as below.
Fax Mode: Make sure "Fax Mode" option is set to "None".