User's Manual Part 2

Firmware Version 1.0.0.1 UCM6200 Series IP PBX User Manual Page 174 of 320
 External Number
 By DID
When "By DID" is used, the UCM6200 will look for the destination
based on the number dialed, which could be local extensions,
conference, call queue, ring group, paging/intercom group, IVR,
voicemail groups and Fax extension as configured in "DID
destination". If the dialed number matches the DID pattern, the call
will be allowed to go through.
Strip
Configure the number of digits to be stripped from the beginning of the
DID. This option shows up only when "By DID" is selected.
Prepend
Configure the number of digits to be prepended to an inbound DID
pattern, with strip taking precedence over prepend.
Dial Trunk
This option shows up only when "By DID" is selected. If enabled, the
external users dialing in to the trunk via this inbound route can dial
outbound call using the UCM6200’s trunk.
DID Destination
This option shows up only when "By DID" is selected. This controls the
destination that can be reached by the external caller via the inbound
route. The DID destination are:
 Extension
 Conference
 Call Queue
 Ring Group
 Paging/Intercom Groups
 IVR
 Voicemail Groups
 Fax Extension
 Dial By Name
 All
Time Condition
Time Conditions
Select the time condition for the inbound rule.
Destination
Select the destination for the inbound call during the specified time
condition.
INBOUNDROUTE:PREPENDEXAMPLE
UCM6200 now allows user to prepend digits to an inbound DID pattern, with strip taking precedence over
prepend. With the ability to prepend digits in inbound route DID pattern, user no longer needs to create
multiple routes for the same trunk in order to route calls to different extensions.