User's Manual Part 2

Firmware Version 1.0.0.1 UCM6200 Series IP PBX User Manual Page 205 of 320
Custom Prompt
This option is to set a custom prompt for a ring group to announce to
caller. Click on ‘Prompt’, it will direct to the page PBX->Internal
Options->Custom Prompt, where users could record new prompt or
upload prompt files.
Ring Timeout on Each Member
Configure the number of seconds to ring each member. If set to 0, it will
keep ringing. The default setting is 30 seconds.
Note:
The actual ring timeout might be overridden by users if the phone has ring
timeout settings as well.
Auto Record
If enabled, calls on this ring group will be automatically recorded. The
default setting is No. The recording files can be accessed from web
GUI->CDR->Recording Files.
Enable Destination
If enabled, users could select extension, voicemail, ring group, IVR, call
queue, voicemail group as the destination if the call to the ring group has
no answer. Secret and Email address are required if voicemail is selected
as the destination.
Secret
Configure the password to access the ring group extension's voicemail.
Note:
The password has to be at least 4 characters.
Email Address
Configure the Email address of the ring group extension's voicemail. If
"Attach Recordings to E-mail" is enabled from Web
GUI->PBX->Voicemail->Voicemail Email Settings, the voicemail can
be sent to the ring group's Email address as attachment.