User's Manual Part 2

Firmware Version 1.0.0.1 UCM6200 Series IP PBX User Manual Page 306 of 320
 Click on to start upgrading.
Figure 191: Upgrading Firmware Files
 Wait until the upgrading process is successful and a window will be popped up in the Web GUI.
Figure 192: Reboot UCM6200
 Click on "OK" to reboot the UCM6200 and check the firmware version after it boots up.
--------------------------------------------------------------------------------------------------------------------------------------------
Note:
Please do not interrupt or power cycle the UCM6200 during upgrading process.
--------------------------------------------------------------------------------------------------------------------------------------------