User's Manual Part 2

Firmware Version 1.0.0.1 UCM6200 Series IP PBX User Manual Page 292 of 320
 Detect Cycle: The UCM6200 will perform the internal disk usage detection based on this cycle.
Users can enter the number and then select second(s)/minute(s)/hour(s)/day(s) to configure the
cycle.
 Alert Threshold: If the detected value exceeds the threshold (in percentage), the UCM6200
system will send the alert.
2. Memory Usage
Figure 172: System Events->Alert Events Lists: Memory Usage
 Detect Cycle: The UCM6200 will perform the memory usage detection based on this cycle. Users
can enter the number and then select second(s)/minute(s)/hour(s)/day(s) to configure the cycle.
 Alert Threshold: If the detected value exceeds the threshold (in percentage), the UCM6200
system will send the alert.
3. System Reboot
Figure 173: System Events->Alert Events Lists: System Reboot
 Detect Cycle: The UCM6200 will check the system reboot based on this cycle. Users can enter
the number and then select second(s)/minute(s)/hour(s)/day(s) to configure the cycle.
4. System Crash
Figure 174: System Events->Alert Events Lists: System Crash