User's Manual Part 2
Firmware Version 1.0.0.1 UCM6200 Series IP PBX User Manual Page 291 of 320
SYS TEMEVENTS
The UCM6200 can monitor important system events, log the alerts and send Email notifications to the
system administrator.
ALERTEVENTSLIST
The system alert events list can be found under Web GUI->Status->System Events->Alert Events List.
The following event are currently supported on the UCM6200 which will have alert and/or Email generated
if occurred:
Disk Usage
Modify Admin Password
Memory Usage
System Reboot
System Update
System Crash
Register SIP Failed
Register SIP Trunk Failed
Restore Config
User Login Success
User Login Failed
SIP Internal Call Failure
SIP Outgoing Call through Trunk Failure
Fail2ban Blocking
SIP Lost Registration
SIP Peer Trunk Status
Click on
to configure the parameters for each event. See examples below.
1. Disk Usage.
Figure 171: System Events->Alert Events Lists: Disk Usage