User's Manual Part 2

Firmware Version 1.0.0.1 UCM6200 Series IP PBX User Manual Page 287 of 320
LAN/WAN connected.
LAN/WAN not configured.
LAN/WAN disconnected.
FXS/FXO connected.
FXS/FXO waiting.
FXS/FXO busy.
FXS/FXO not configured.
FXS/FXO disconnected.
Other operations are also available in interface status section:
 Click on "Interfaces Status", the web page will redirect to ports configuration page which can also be
accessed via web GUI->PBX->Internal Options->Ports Config.
 Click on
to refresh the interface status.
 Click on [ + ] to expand the interface details.
 Click on [ - ] to hide the interface details.
PARKINGLOT
The UCM6200 supports call park using feature code. When there is call being parked, this section will
display the parking lot status.
Figure 168: Parking Lot Status
Table 96: Parking Lot Status
Caller ID Display the caller ID who parks the call.
Channel Display channel for the call park.
Extension Display the parking lot number where the call is parked/retrieved.
Timeout
Display timeout (in seconds) for the parked call. The status page will
dynamically update this timer from 120 seconds (default) to 0. When the timer