User's Manual Part 2

Firmware Version 1.0.0.1 UCM6200 Series IP PBX User Manual Page 280 of 320
Number
Configure the group number. The group number is used in combination
with the code. For example, if group number is 666, and code is 55. The
user can dial 55666 to send prompt 55 to all members in group 666.
Note:
The combination number must not conflict with any number in the system
such as extension number or conference number.
Announcements Center feature can be found under web UI->PBX->Value-added Features->
Announcements Center. The following example demonstrates the usage of this feature.
1. Click
to create new group.
2. Give a name to the newly created group.
3. Create a group number which is used with code to send voice message.
4. Select the extensions to be included in the group, who will receive the voice message.
Figure 159: Announcements Center Group Configuration
In this example, group “Test” has number 666. Extension 1000, 1001 and 1002 are in this group.
5. Click
to create a new Announcement Center.
6. Give a name to the newly created Announcement Center.
7. Specify the code which will be used with group number to send the voice message to.
8. Select the message that will be used by the code from the Custom Prompt drop down menu. To create